Key Components
The Clearly Solar thermal system is made up of four key components:
Flurosorb Flat Plates
The Flurosorb flat plate gives you, high efficiencies from a large absorber area of 2.02m2, robust construction from toughened glass, making it long lasting – whilst the slim line frame gives it a total footprint of just 2.24m2, and at 43kg it is one of the lightest flat plates on the market.
Made of brushed aluminium with a neat design that subtly fits with the roof, Clearly Solar flat plates can be installed both in-roof and on-roof, horizontally or vertically, or fixed to A-frames and mounted on a flat roof or in a garden.
The neat design subtly fits in with the roof and low protrusion making it well within the threshold normally
required for planning permission.
- Collector efficiency 81.8%
- Light transmission 91%
- Solar radiation absorption 95%
- Solar radiation emission 5%
- Shutdown temperature 196ºC
- 60mm insulation for improved efficiency
- 10 year warranty
Fluropro Controller
The Fluropro controller is the real brains of the operation, simple to use. A solar gain display shows how much energy has been collected from the sun since the system began operating.
Intelligent functionality in the controller holds off the boiler whenever there is solar gain to be had making fuel usage as low as possible.
Flurocyl Twin Coil Cylinder
Unvented, stainless steel and narrow enough to fit through any standard airing cupboard door, the Flurocyl twin coil cylinder is a cylinder for all seasons.
To ensure that every last bit of the suns energy is used, solar fluid is steadily pulsated into the bottom coil of the cylinder, evenly heating the water and ensuring that the boiler does not fire up until it really needs to.
- Compatible with all open vent and sealed systems, including the full range of Glow-worm boilers
- Available in 200, 250 and 300 litres
- Insulation meets CHeSS best practice (loss as low as 1.9kWh/24hrs)
- 25 year warrantee on cylinder shell
Solar Pump Station
The Solar Pump Station pumps the solar fluid from the flat plate to the cylinder and back again. Its compact design fits easily on the wall in the house or loft.
The three speed pump enables you to match the flow rate of the system to a wide range of properties. Because heat naturally rises the pump station is fitted with 2 check valves which stops circulation of the solar fluid when the pump is not running, forcing the heat to stay in the cylinder rather than transferring back into the flat plate, increasing system efficiency.
